5247 Remanufactured Heidelberg Harris M1000BE Web Offset Press System

Serial: CSO # 0B4694

Model: M1000BE 

Year: 1994 / Rebuilt 

SKU: 5247

Description:
21.75" Cutoff x 35" Width 

Features:
Remanufactured Heidelberg Harris M1000BE Web Offset Press System 

21.75" Cutoff x 35" Width 

6 to 8 Unit Press

Specifications:
(1)Remanufactured Butler Splicer Datamat model #6000 with Hoist and connecting framework 50” roll
capacity.
(2) New Tidland lightweight Air Shafts for the Butler Splicer. Old shafts are often not worth 
rebuilding so with a remanufacture we recommend upgrading to new air shafts.
(1) Remanufactured Harris T-23U single pass infeed with (1) incorporated WPC Web Guide shaft 
driven.
(1) New servo trim system for the Infeed Harmonic. Old electronics are unreliable and do not 
control tension properly.
855 Morse Avenue
Elk Grove Village, IL 60007
Tel: (847) 718-1516
Fax: (847) 718-1517
email: info@graphicinnovators.com
www.graphicinnovators.com


(6) Remanufactured M1000B printing units with Duotrol Dampening
(1) New Motorized Ink Fountain Roller Upgrade.
(1) New Water Circulation System with Cooling chiller and auto mix. This system will supply 
fountain solution to the Duotrol Dampening
(1) New Guarding package upgrade for the Printing Units
(10) Baldwin Impact Blanket Washers
(1) NEW GI Web Break Detection System.
(2) Baldwin web severers
(1) AWS Vibrator temperature control unit
(10) New GI Ink Levelers
(1) Remanufactured WPC CCR Register system.
(1) Remanufactured Dual Zone Tec Dryer approx. 31’ in length.
(1) Remanufactured Harris 6 Roll Harris Chill Stand Shaft driven
(1) Remanufactured WPC Silicone App.
(1) Remanufactured Combination Folder with Tab and Chop and digest fold capabilities
(1) Two out Ribbon deck for the combination Folder
(1) Remanufactured PFF2 Pinless Frormer Folder
(1) Low pressure Blower provided for the ribbon deck and former board.
(1) New Baldwin/AWS air cooler for the LP Blower
(1) Engineering package consisting of General Arrangement Drawings, floor pad outline, utility 
requirements and Drawing for placement, electrical documentation and programming Documentation.
(1) Remanufactured Baldwin Impact Blanket Wash System including new control system
(2) WPC Cut Off Controls
(1) Remanufactured Operator Console
(10) NEW AC Drives for all water pan rollers and for the Ink Ball Roller, auto ramping and
programmable curves.
(1) NEW Dryer Web Temp Sensor and Eurotherm Controllers
(6) NEW rubber resurfacing for 6 unit’s worth or rubber rollers (one spare set)