Full-auto Flute Laminating Machine (QBZ-130 / 145 / 165 / 195)

Full-auto Flute Laminating Machine (QBZ-130 / 145 / 165 / 195)

1. Size changeover needs only 6-10min, so more suitable for short and single product;
2. Adjustment of joint error is available when running at high speed without stop-press;
3. Double upper surface paper structure; stacking paper up to 1.8m; pre-folded feeding mode to save time more;
4. Bottom paper indraught device operates in the way  from  center  to  the outside  to adapt to different sizes, so paper is fed smoothly more;
5. Feeding  adopts  electromagnetic  braking system ; when abnormal stop , no inertial rotation exists to avoid paper waste;
6. Surface and  bottom paper  adopt  synchronous photoelectric control  technology to avoid unreachable bottom or surface paper;
7. All electrically-controlled belts and motors adopt elements and components made in Japan, USA and Taiwan.
8. Latest improvement: The original double paper-feeding chain is stable and durable.


Full-auto Electric-control System:
adopt Taiwan PLC  Electric - control system and inverter, It features in incorporate control, perfect funciton, strong adaptability , and low power consumption. It adopts  non - contact control by  in tegrated circuirt , which  can freely alter  the  systematic controlling  programme according to  the requirements of  its  techics.

Feeder base:
It  adopts  HMA  printer with  feeder  head  design, strengthen type  feeding device , which ensures  a  accurate  paper  absorbing  and a smooth paper  feeding . It  is  equipped  with constant  paper - piling system, which can  fully  satisfy  the  requirement of high efficient operation.

Substrate Paper Feeding Section:
adopt  air - absorbing  belt to feed the paper driven by motor , which corresponds to A/B/E flute  three - layer, five - layer  corrugated paper and cardboard and substrate  board paper and ensure an accurate andsmooth feeding.

Micro-tuning Regulator:
Original Nippon  micro - tuning phase regulator is combined with timing para system; it can adjust the sticking error in the  Non - stop  state when the machine works in high speed.

Transmission system:
replace  the traditional gear chain with imported timing belt , which can perfectly  solve the problems of inaccurate sticking problem aroused from metal chain abrasion.

Paper Triming and Timing Section:
Adopt the  synchronous pushing mode rollers, substrate & litho rollers  will push  synchronously the litho paper and substrate  paper into the  sticking section, and adjust the gluing precision between litho andsubstrate paper by micro tuning in the non-stop state.

Glue coating system

Automatic glue - adding device is combined with a run-off glue recycling system,which can avoid waste of glue . According to the requirement , the controlling wheel can be adjusted for  control of  glue  thickness  and can  be  equipped  with special embossing glue  roller, which  efficientlysolve  the problems of swing and pasting during coating and save the consumption of glue.

Model

	Max. paper size (LxW)(mm)	Min. paper size(LxW)(mm)	Max. Top Sheet's Thickness (g/㎡)	Min. Top Sheet's Thickness (g/㎡)	Max. Bottom Sheet's Thickness (g/㎡)	Min. Bottom Sheet's Thickness (g/㎡)	Lamination Error (mm)	Speed(p/hr)	Actual power (kw)	Total power(kw)	Machine Dimensions(LxWxH)(m)	Total Weight(KG)
130	1300x1100	350x350	1100	180	1100	250	<±1.5	6000	7.5	12.6	12.5x2.3x2.6	6500
145	1450x1300	380x450	1100	180	1100	250	<±1.5	6000	7.5	12.6	12.5x2.4x2.6	7300
165	1650x1400	500x370	800	250	800	250	<±1.5	6000	7.5	12.6	15x2.5x2.6	7600
195	1900x1450	800*600	800	250		250	<±1.5	4000	12	19	16x2.7x2.6	9500