ZYK-1800 AUTOMATIC PRINTER SLOTTER DIE CUTTER

Characteristics:

◆ Control system: Delta PLC, productionorder can be saved and recalled to save changing time.Memorize system for easyoperation and maintenance.

◆ Double servo feeding system,each row of feeding wheels is driven by indepandent servo motor,high precision and low noise,non-feeding rollers in feeder to prevent the corrugated wave from damaging.

◆ Printing: Adopt famous brand anilox rolland rubber roll to ensure high-quality printing.

◆ Slotter: computerized control the boxlength, width and box height, fast and convenient.

◆ Die cutter: independent engine drivecontrolled by KEB servo system from Germany to ensure the die cutting accuracy.

Surface speed compensation system. Diecylinder shifts when running to prolong the life of rubber anvil.

◆ Gears are made of high-quality chromesteel, heat treated and grinded to ensure the high stability and precision.

◆ Bearings and electrical components areall famous brand in Taiwan and in China.

Feeder

◆ Double servo feeding system,each row of feeding wheels is driven by indepandent servo motor,high precision and low noise,non-feeding rollers in feeder to prevent the corrugated wave from damaging.

◆ Dust removal device: the cleaning brush can clean the dust on surface of corrugated board to

improve the printing quality.

◆ Side stop is motorized control. Flappingdevice to make the sheet pile in good shape.

◆ All the information can be showed andadjusted in the main touchscreen. The phase of each unit, box height can be

setted in the main touchscreen,

◆ Memory system: Production orders can besaved and recalled to save changing time.

◆ Ink alarm system, the buzzer sounds whenthe printing unit be lack of ink.

Printing section

◆ Memory system for easy operation andmaintenance.(This system can help to remember position of printing cylinderwhen operator stop the machine and open it to adjustment

on printing plate. After finishingadjustment and close the machine sections, people can use this system to makeprinting cylinder return to the former position(before stop and open sections).

◆ 7.0 inch touchscreen on the printingunit,The printing register is computerized control. The printing cylinder ismotorized and computerized moved axially(±5mm).

◆ Mounting plate system to save thechanging plate time. foot switch is used to turn the printing cylinder whenmounting the printing plate.

◆ The anilox roll lift up and separatefrom the printing plate automatically when sheets are not feeded. And theanilox roll

keep running when lifted up to prevent theink from drying.

◆ Self-locking and fast move of thefeeding wheels on printing unit.no need to fix the feeding wheels by screws.

Slotting section

◆ Single shaft double knives slotter,7.0inch touchscreen on the slotter, box height, box length and width are all controlled

by PLC and can be stored in the computer,saving the changing time in future.

◆ The up knife,lower knife, pre-creaserand creaser are synchronously moved. The precision liner slideway can ensurethe flexible and stable of moving.

◆ The up creaser wheel is covered byrubber anvil to protect the corrugated board from damage.

◆ Flexible corner cutting knife can cut3,5 and 7 layer corrugated board without adjustment. Easy to operate.

◆ The cutting knife is made of highquality alloy steel, knife thickness 7mm.

◆ Hand hole punching device is optional.

Die cutting section

◆ Independent engine drive controlled byKEB servo system from Germany to ensure the die cutting precision.

◆ Surface speed compensation system, thissystem can ensure rubber anvil cylinder running at the exact same speed with

the die cylinder when the rubber anvilcylinder's diameter becomes smaller after long time using.

◆ Die cylinder shifts axially(±42mm)whenrunning so that the cutting knives cuts different position every time on therubber

anvil,which can reduce the damage for therubber anvil.

◆ A turning tool on the die cutter canrepair the rubber anvil which is damaged after long time using.

◆ The die cutting phase is controlled byPLC (both in running and stop )and can be stored in the computer.

◆ Self-locking and fast move of feedingwheels, no need to fix it with screws.