|
GS series |
650GS |
800GS |
1100GS |
|
Processed Materials |
|
|
|
|
Carton board max. |
800 gsm |
800 gsm |
800 gsm |
|
Corrugated flute type |
A,B,E |
A,B,E |
A,B,E |
|
Capability |
|||
|
Speed max. |
400 m/min |
400 m/min |
400 m/min |
|
Inching speed |
10 m/min |
10 m/min |
10 m/min |
|
Thickness of folded box max. |
12 mm |
20 mm |
20 mm |
|
Blank width |
650 mm |
800 mm |
1100 mm |
|
Dimensions & weight |
|||
|
Length*Width*Height |
12*1.4*1.8m |
16.5 *1.4*1.8m |
16.5*1.7*1.9m |
|
Net Weight |
4T |
6.6T |
7.6 T |
|
Electrical connected load |
12 kW |
15 kW |
15 kW |
|
Compressed air |
6 bar |
6 bar |
6 bar |
|
Air compressor capacity |
10 m³/h |
10 m³/h |
10 m³/h |
|
Air tank capacity |
60 L |
60 L |
60 L |
|
Common type and size
Carton type and size: |
|
|||
|
Model |
650Type |
800Type |
1100Type
|
|
|
A |
650-100 |
800-100 |
1100-100
|
|
|
B |
500-60 |
800-60 |
800-60
|
|
|
Size of two-sides glue box and folded box |
|
|||
|
Model |
650Type |
800Type |
1100Type
|
|
|
A |
500-100 |
800-150 |
1100-250
|
|
|
B |
400-60 |
800-60 |
800-60
|
|
|
H |
150-20 |
150-20 |
150-20
|
|
|
Size of bottom-locked carton and folding carton |
|
|||
|
Model |
650Type |
800Type |
1100Type |
|
|
A |
650-146 |
800-146 |
1100-250
|
|
|
B |
450-60 |
700-60 |
700-80
|
|
|
H |
180-20 |
180-20 |
100-25
|
|
|
Size of 4 corners box and folding box |
|
|||
|
Model |
650Type |
800Type |
1100Type
|
|
|
A |
500-120 |
800-120 |
1100-120
|
|
|
B |
400-120 |
800-130 |
800-130
|
|
|
C |
150-20 |
150-20 |
150-20 |
|
|
|
|
|
|
|
|
Size of 6 folds box and folding box |
|
|||
|
Model |
650Type |
800 Type |
1100 Type
|
|
|
A
|
500-120
|
800-120
|
1100-250
|
|
|
B
|
400-100
|
800-130
|
800-130
|
|
|
C
|
150-30
|
150-30
|
150-30
|
|
Feature introduction
|
Feeder section |
|
|
Independently motorized servo motor control, simultaneous feeding mode with the main motor.
|
|
|
Operators can operate feeder switch in any regional.
|
|
|
Rail width can be horizontally adjusted and set by seven pieces 30mm thickened feeding belt and 10mm metal board.
|
|
|
Feeder section equipped with three pieces feeding knife, adjust the asymmetrical lengths as per the box samples.
|
|
|
Embossing drive wheel guide the feeding section belt, side feed gates in the right and left are adjustable according to the products.
|
|
|
Vibration device coordinate with motor which helps machine consecutive and automatic feeding quick and simply. Feeder section can stack 400MM height paper board.
|
|
|
Aligner section |
|
|
The paper board sent from feeder section will be corrected by aligner section to ensure transmission accurately.。 Pressing drive pressure can be adjusted up and down to accommodate different paper board thickness.
|
|
Pre-folding section |
|
|
Special first folding line pre-fold 180°. third line 165° , which perfectly meeting the requirements of automatic packaging industry.
|
|
Crash lock bottom section |
|
|
Complete set of folding hooks and helixes to fold the front flaps of the blank smoothly and accurately.
|
|
|
Sectional-type upper belt board with special design, which can be adjusted according to the products type ,no need to tension belt.
|
|
Lower gluing tank |
|
|
lower gluing tank is large volume. |
|
|
Electronic upper gluing system by guns.。
|
|
Folding and Closing section |
|
|
The Second and fourth folding line 180°
|
|
|
Folding and closing section transmit from right and left side ,the belt speed can be adjusted separately and correct the way of box running to ensure straightly delivery.
|
|
Trombone section |
|
|
Up and down belt can be adjusted separately.
|
|
|
Equipped with photo electronic counting device
and kicking paper device, which can press the paper after accounting and
make it easy to pack . Also equipped
with feeding paper inspection device. |
|
|
Press section |
|
|
Equipped with special additional sponge belt for the press of boxes valley part.
|
|
|
Upper section moves back and forward, allowing for different box length.
|
|
|
Pneumatic pressure regulator ,which can effectively ensure the uniform of fitting
pressure, makes machine easy to adjust. |
|
4 and 6-corner device |
|
|
Machine using motorized and united electronic back folding system with intelligent servo motor technology. |
|
Servo-motor of back folding device
|
|
|
Two driven shafts allow a precise fold of the rear flaps. Easy to setup through the main touch screen.
|
|
|
Spraying System |
|
Equipped with three guns, convenient in the production of 4/6 corner box and various special-shaped box, gluing quickly and accurately sizing. |
|
Box design and samples |
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
||||
|
|
||||
About Us | Help | Our Services | Security and Privacy | Terms of Use | Declaration | Contact Us
Wap Version
;)
