TL110 Brilliance pink

Nature 
1. the Shape:fluid slurry of small particles of pigment suspended. 
2. The main ingredient: pigments, dispersants, wetting agents, water and so on 
3. Pigment particle size:0.1-0.2μm（100-200 Nano） 
4. Ionicity: Anionic 
5. PH :7-8 
6. Expiration date：＞24months（0-40℃） 

Application 
Applicable to all kinds of fiber textile printing：cotton, linen, wool, silk, polyester, nylon, acrylic, viscose and so on 
Can be used to dye and print in Leather ,woven, paper ,timber and so on 
Can be used as dyeing in interior and exterior paint, cement ,aqueous ink , water-based paint ,synthetic detergents ,cosmetics and the other water-based materials 

Features 
1. Complete chromatography, bright colors, pure hue and stability 
2. Pigment particles is small of uniform size, uniform and stable dispersion 
3. Has excellent water resistance, scrub resistance, abrasion resistance, dry heat, sunlight-resistant, weather-resistant color fastness, etc. 
4. Stability of chemicals such as Organic solvents, acids, bases, electrolytes, reducing agents, oxidizing agents and other chemicals 
5. Low viscosity, color convenient and accurate measurement 
6. The pigment content is high, the color-enriched was significantly enhanced . 
7.Accord with the demand of “Oeko –Tex Standard 100” 、GB 18401-2003 National Safety Technical Code for Textile. Product quality has reached the international advanced level of similar products. 

Usage 
After the desired coating paste mixed and diluted with water ，add it to the slurry, stir and filter ，it can be used until the bubble disappears in the slurry 

Precautions 
1. after Long-term storage, if any part of the pigment is precipitation phenomenon, just stir it and continue to use, that does not affect its performance 
2. seal the containers of pigment paste  timely After access /use ,avoid prolonged contact with air to produce pigment particle aggregation and conjunctiva phenomena 
3. Printing or dyeing color fastness is related to adhesive quality, the amount of matching paint color paste and adhesives, reprocessing fixing conditions and other factors,it can be put into production after passing through the sample detected. 
4. Use tools, equipment, additives and raw materials must not contain or contact with formaldehyde, aromatic amines, etc., to prevent cross-contamination affecting environmental standards.